Schlagwort-Archive: Kickstarter

Robomotive Labratories introduces immersive reality robot

Veröffentlicht am von
1

Cincinnati-based Entrepreneur launches Kickstarter campaign to bring ‘mimic’ innovation to more people

Cincinnati, OH (Oct.1, 2016) – Robomotive Laboratories is changing the way the world sees robotics with the introduction of their transformative new robot, mimic. Today, the Cincinnati-based small family business launched a new Kickstarter campaign (https://www.kickstarter.com/projects/713401305/mimic-immersion-robot) to help advance the development and production of the new technology.

Mimic represents a technological breakthrough in the way people interact with a robot. Through a series of interfaces and controls, the user is transported and able to see what mimic sees, do what mimic does, feel what mimic feels, and go where mimic goes.

“After a successfully-funded Doorbell Phone campaign on Kickstarter, I began to indulge in my love of robotics and introduced the Cortex:Robot Arm controller,” said Brett Pipitone, founder of Robomotive Laboratories. “We continued to develop the technology by adding joints, cameras and motion and soon realized that we had developed something truly unique: The mimic robot was born.”

The key to bringing mimic to life is the mimic arm controller with patent-pending Posi-Feel grip controllers. The user wears a device that allows the seamless control of mimic’s arms and grippers by moving his or her own hands and arms in natural ways while holding two simple handles with trigger style grip controllers. A series of joints, pivots and sensors are built onto the mimic Arm Controller to make this possible.

Mimic can also move around on its own power, controlled by the user with an IRS based foot controller. The user places both feet on the controller and tilts the device forward, back, left, or right to command mimic’s movements in natural, hands free ways.

To complete the user’s sense of immersion, immersion goggles receive 3D video from a pair of cameras in mimic’s eyes. Not only does the user see what mimic sees in vibrant 3D, but using a series of sensors and motors the user’s head motion is duplicated by mimic’s head, allowing the user to change view by simply moving his or her head.

This assemblage of new technologies allows the user to see the world from a fresh, new point of view- that of a 12 inch tall, wide-eyed, rotund little robot. In the words of Robomotive Laboratories founder Brett Pipitone „mimic represents a technological breakthrough in think about human interfaces by adapting the robot to the user, rather than the other way around.“

Robomotive Laboratories realized early that a single version of the mimic robot would not fit all users needs, so backers have a choice of four versions of the robot, each design with a different use in mind.

  • The mimic:maker version comes in kit form for the user to assemble. The kit includes a robot with two arms and grippers, as well as a mimic arm controller. The kit does not include a body, however, so the user can tailor the robot to their needs or to make something new. For even more flexibility, all the electronic inputs and outputs are exposed to be manipulated or utilized by the user, including record and playback through an on board SD card. „The future is being invented in basements, garages, and maker spaces all over the world. That’s where mimic was born, and mimic:maker is a chance for other tinkerers to use and improve it,“ says Pipitone.
  • The mimic:play comes as a fully assembled robot, including the 12- degrees-of-freedom arm controller. While mimic:play doesn’t have as many features as some offerings, it’s just as adorable and its simplicity makes it more accessible for some users. Fun features like the mimic arm controller, Posi-Feeel grippers, and on-board SD card are included. As Pipitone suggests, “mimic:play is simpler than the other versions, but still offers intuitive control and a sense of feel. It’s great for younger users or for interactive settings.”
  • The mimic:social has all the features of mimic:play, but also adds the IRS based foot controller, 2D camera, and a video receiver to be attached to the user’s television. „People love the concept of interacting from a distance,“ says Pipitone. „It’s great fun to put mimic:social in a room and watch it’s interactions on TV with your friends.“
  • The mimic 3D is the most advanced and full featured version offered and includes the mimic arm controller with Posi-Feel grippers, the foot controller, and SD card, in addition to the immersion googles and 3D cameras. With this full suite of features the user can completely loose themselves in mimic’s world. „This robot really transports you to an immersive reality. Everyday things seem huge, and you can interact from an entirely new point of view,“ describes Pipitone. „I can interact with my baby daughter on her level as an equal, while it’s simple enough that my 6 year old son can pick it up and use it. It’s an indescribable experience.“

The implications of the mimic immersive reality robot are great, and users can be a part of it now by backing mimic on Kickstarter. According to Pipitone, „We’ve delivered the personal robot of the future. We’re still working on flying cars and jet packs.“

For more information, please visit: http://www.robomotivelabs.com/.

blinkgogo – Wireless program Arduino & Fun Robotic Learning Platform

Veröffentlicht am von
Antworten

I just received this information from the blinkgogo team:

“Wireless program Arduino & Fun Robotic Learning Platform. Designed for STEM education, Open Source! APP controlled, based on  Arduino, supports Scratch. Let kids Play and Learn! ”

Blinkgogo is a open source fun STEM robotic learning platform based on Arduino. Blinkgogo supports wireless Bluetooth upload, APP controlled, Scratch.

This robot kit has everything you need to get started. You can demonstrate many standard robot functions right out of the box. It’s simple, easy to use and fun.

With Blinkgogo, you can build many standard robots for example Line Following robot, Light Seeking robot, Edge Detection robot, APP control robot.

It comes with 3D printed shell and compatible with LEGO blocks.

Blinkgogo also comes with a hardware expansion board for those who really want to go wild when it comes to trying new things and developing new robotics systems.

Blinkgogo comes with three step-by-step tutorials to help you learn programming.

  • Binkgogo play right out of the box Tutorial: Blinkgogo works right out of the box. You can demonstrate many standard robot functions. You can drive it by controlling it with your phone through it’s Bluetooth capability. Or have it follow a black line.
  • Blinkgogo for Beginners Tutorial:Blinkgogo comes with a number of step-by-step tutorials. It is easy to program with the scratch graphical programming language. For the more extreme programmers it also works with C++. And the Arduino IDE programming environment
  • Blinkgogo for Advanced Users Tutorial:Blinkgogo offers a lot for advanced users. Blinkgogo comes with a hardware expansion prototyping plate where you can mount servos and many other sensors.

It’s perfect for STEM education:

In the home

Perhaps your home has many toys already. However we believe to prepare for the future children need toys that are made to be modified and programmed. Children need to learn not just to be consumers but to actively participate in the building and modifying of things around them.

In school

Everybody knows that STEM education is important however most robotics platforms do not come with enough easy to use tutorials out of the box to be used by most non-engineers and still have enough flexibility to be still useful to those who excel in programming.

Why we made this kit?

Ever since I was a child I have always wanted to learn how to make electronics. Now that I am an electrical engineer my dreams are now a reality. However in the past when friends and asked if they could do electronics, my only answer was you need to go to school to be an electrical engineer.

Luckily time to change. Thanks to Arduino and other open-source platforms it’s not only possible for my friends to start their own hobby electronics products I can now start teaching my two children Harry and Tina. I have selfishly developed Blinkgogo specifically to teach my children electronics. But due to enthusiasm from my neighbors I have developed Blinkgogo into a product to share with the world. I hope you have as much fun with Blinkgogo as I did developing it and share it with my children.

We are on kickstarter now!

We are now crowdfunding on kickstarter now. We got over 60% funds within 24 hours. Please support us and let more kids can enjoy this all-in-one robotic learning platform!

Website:  www.blinkgogo.com

Video:              https://www.youtube.com/channel/UCgj2axca16VY3bHaIBzzzuQ

Facebook: https://www.facebook.com/blinkgogorobot/

Twitter:  https://twitter.com/BlinkgogoRobot

Google+:  https://plus.google.com/u/0/111819239969740793655

Kickstarter link: https://www.kickstarter.com/projects/makerstudio/blinkgogo-wireless-arduino-and-fun-robotics-learni?ref=4a4oio

Trending on Kickstarter: ‘MOTI’ is your personal robotic companion for building healthy habits

Veröffentlicht am von
Antworten

SAN FRANCISCO, CALIF. —  Emerging from an industry saturated with apps and wearables, San Francisco based startup MOTI (www.moti.io) is seeing tremendous support on Kickstarter, exceeding a goal of $50,000 within the first five days of launching. At 23 days left on the campaign, MOTI has over 700 backers, and has now released additional “stretch goals” for their little robot. These goals include adding a wild card color that backers can vote on, integrations with Fitbit, Evernote, and Google Calendar, as well as a new top secret feature – should the campaign reach $175,000.

 

Who is this little robot and why is everyone so intrigued by him? First, MOTI is a physically present smart companion for building better habits. The device combines insights from behavioral science, social robotics and human-centered design, and is built to learn and react to human beings’ psychological triggers with the purpose of getting them to start practicing healthy habits (such as jogging, hydrating, meditating, etc). Second, what makes him different is that unlike a standalone app, MOTI’s very physicality, presence, and emotional AI contributes to his ability to effectively influence behavior. Standing at just under three inches tall, MOTI acts as an ever-present environmental queue that is meant to interact with you in the moments and places where you would normally start forming your habit (i.e. your kitchen, your work desk, your yoga space,etc.).

 

The science and design behind MOTI’s habit-forming influence draws from the habit-loop theory, which explains that in order to build any habit, three things are required: a trigger, a routine, and a reward. To help you form your habit, MOTI supports all three things through a combination of lights, haptics, human-like intonations and other sounds. In order to have the best effect on behavior, MOTI is also designed to form a bond with the user, and his personality is continually adapting to the users’ needs.

 

“What we found in early research is that apps and wearables rely on data, graphs, and tracking for motivation,”  says Kayla Matheus, Inventor and Co-Founder of MOTI. “But we’re human – we need more than just numbers. We need our technology to understand how we work at a psychological and emotional level. That’s why MOTI isn’t another device – he’s your friend, or your cheerleader, or even your mom.”

 

Live demos are available today at BulletProof Bio-Hacking conference, and customers can now pledge an order for their own MOTI at http://kck.st/2d8NBu2 , on sale for $99 each and available in light grey, dark grey, and turquoise.  

 

About MOTI

MOTI is a behavior change company combining science and design to create transformative products that help people live better lives, one habit at a time. Established March 2015 in New York City, the company is led by Founder and CEO Kayla Matheus (Yale BA’11) and Founder/COO Laura Day (Vanderbilt BE’02, Harvard Business School MBA ‘09). MOTI is an alum of Google 30 Weeks and Highway1 Accelerators. Connect with MOTI via Facebook, Twitter, and Instagram (@habitMOTI) or visit www.moti.io to learn more.

Giant Cardboard Robots

Veröffentlicht am von
Antworten

I just received this message from the „Giant Cardboard Robots“-Team:

Are you in need of inspiration for your kid’s next Halloween Costume? Check out Giant Cardboard Robots, a project that makes Kid-Sized Giant Cardboard Robot Arms a reality.

At Giant Cardboard Robots, we have been making and selling adult size giant cardboard robot arms for the past several years, and now we have put together an offering especially for the junior giant robots among us.

Our Kickstarter rewards include DIY kits for cardboard robot arms in both the kid and adult sizes, plans to allow crafters to make their own robot arms from cardboard they have laying around, as well as some truly unique corrugated creations ranging from a giant robot pirate hook to a wearable giant cardboard jack-o-lantern head.

We have launched a Kickstarter campaign that will run until September 30 and has been picked by Kickstarter itself as a „Project We Love“.

 

More information: http://kck.st/2bqTqjP

Onion Launches the Omega2 to Bring Innovation to the Internet of Things (IoT)

Veröffentlicht am von
Antworten
July 29, 2016 – Onion announces the Omega2, the IoT development board aimed at bringing innovation back into the IoT space. The Omega2 launched on Kickstarter last week and is currently more than 1,100% funded, with 25 days left to go in the campaign. Campaign Link: https://www.kickstarter.com/projects/onion/omega2-5-iot-computer-with-wi-fi-powered-by-linux
IoT never really gained mainstream status. Most „smart“ products on the market are nothing more than ordinary products with a screen slapped on it. These products don’t bring true value, so as soon as the novelty factor wears off, consumers move on to try the next „smart“ thing. Innovation in IoT is driven not by the needs of the market, but by the need of product companies to create new products and turn a profit. To bring innovation to IoT, the products need to be repositioned to address real pain points in everyday life. Onion aims to do that with the Omega2 by making hardware development accessible so everyone can start solving problems in their lives with IoT technology.

„We created the Omega2 to be the most accessible hardware development board,“ says co-founder and CEO Boken Lin. „We do this in two ways, by making it extremely affordable, and by making it very beginner-friendly. There is always a risk involved with trying new things, and by reducing the price to starting at just $5, we hope to minimize that risk so more people can make the plunge. Making it beginner-friendly means that even users with no electronics experience can do something with the Omega2 on day one.“

With a myriad of hardware development boards already on the market, the Omega2 is uniquely positioned as having the advantages of single-board computers such as the Raspberry Pi as well as microcontrollers such as the Arduino. It is much smaller than the Raspberry Pi (less than ¼ the size), and it is much more power-efficient, yet at the same time, it is much more powerful and robust than the Arduino, allowing it to be used in applications such as video/audio streaming, etc.

Because the Omega2 runs Linux, and for inexperienced developers, developing on it will feel much like using a regular computer. An added advantage to supporting Linux is that the Omega2 supports many programming languages. This capability makes the Omega2 approachable for existing programmers who are new to hardware development, allowing them to build hardware projects with familiar languages and programming environments. Finally, for users with absolutely no experience in programming, the Omega2 integrates Node Red, a programming environment developed by IBM that allows users to program IoT devices by simply dragging and dropping block diagrams.

„Everything around us is becoming smart.“ says Lin. „It started out with the smartphone movement in 2006, and now everything from thermostats to televisions, from cars to light bulbs are becoming smart. We want to create the tools that give everyone the power to reinvent their environment. And that’s why we have worked so hard to make the Omega2 so simple and affordable for everyone.“

Onion is a startup that aims to create “The Invention Platform for the Internet of Things”, a collection of hardware and software development tools that simplifies the process of creating and manufacturing connected products. The company is based in Boston, Massachusetts, with operations in Toronto, Canada, and Shenzhen, China. Onion completed a very successful Kickstarter campaign last year to launch the first generation Omega. Onion is backed by Techstars, and went through their 2014 Winter program in Boston.

3D Printed Robot Arm for STEM Created by Idaho Startup

Veröffentlicht am von
Antworten

Boise, ID – Slant Robotics has launched a Kickstarter campaign for a 3D printed robot arm, LittleArm. LittleArm is low cost kit for teaching engineering and robotics to students in STEM courses.

 

The LittleArm began as a weekend project for Slant Robotics founder, Gabe Bentz. “I didn’t want to pay the 100-plus dollars for an existing arm kit,” said Bentz, “So, I did a little design and let my 3D printer do the work.”

Bentz eventually showed his creation to colleagues and friends in the area. Many asked him to make them one. But when several STEM teachers expressed interest in the arm for their classrooms Bentz decided to turn the kit into a product, at Slant Robotics.

Thanks to rapid prototyping techniques the LittleArm was ready for production within just a few weeks. It utilizes high strength metal-geared microservos, and is controlled with a standard Arduino Uno allowing it be programmed using graphical software such as Blockly. When connected to a computer, Slant has created a simple graphical app which allows the arm to be trained to execute a set of motions.

The entire project is open-source, allowing anyone to download the 3D designs and software and build their own LittleArm.

At the time of this release, the LittleArm Kickstarter campaign has passed the halfway point, after being live for just 2 days. Over the next few months the team at Slant Robotics will be developing software and producing teaching materials so that students and teachers can easily use the LittleArm when it arrives.

About Slant Robotics

Slant Robotics is a startup located in Boise, ID. Its mission to to develop consumer robots for the home, school and business. The LittleArm is the fourth product that Slant has released.

BuWizz – The one brick to steer them all

Veröffentlicht am von
Antworten

BuWizz is a high performance LEGO® compatible remote control system and battery, seeking to raise $50,000 on Kickstarter. Why we made BuWizz? The original LEGO® Power Functions control system allows lesser speed, power and agility than users would like to have for their models. Created as an enhancement to the existing LEGO® remote control system, BuWizz is better than anything available on the market until now. Paired over Bluetooth with an iOS or Android device, BuWizz brick is made to control the motors and lights of LEGO® Trains and LEGO Technic models. Besides motors to power movement, BuWizz users will be able to add light effects and other special functions to their models.

While one BuWizz brick can control up to four motors or lights, several bricks can be controlled in parallel, from either one or more smart devices. Users can control a huge model with 8, 12 or even more motors and lights. It’s perfect for having fun, like racing against each other using several cars. One BuWizz brick inside the model replaces 3 LEGO components: a battery box and two infrared receivers, while only occupying the space of two receivers.

Connected inside a LEGO model or train, BuWizz brick offers precise control and provides eight times more power than existing solutions. It operates in three speed modes, pushing any LEGO model to it’s limits in “Fast” mode. Until now, LEGO models were mostly limited to indoor use. With BuWizz they come alive, zoom around two times faster and are ready to defeat the most difficult outdoor terrains.

In a later announced stretch goal, BuWizz team will offer “Ludicrous” mode, the next generation of speed and power levels, which will dwarf even the currently highest-performance “Fast” mode.

Users will be able to write their own Apps to control BuWizz and integrate BuWizz into platforms of their choice, the communication protocol will be open.

The reason for success is design and clever engineering solutions, which made BuWizz powerful and simple to use. Several benefits of BuWizz are due to the embedded Li-ion battery, which provides power for hours of fun. BuWizz can be recharged with any Micro-USB charger. The App will alert users when power is running low. For extended play time, BuWizz can also be charged on the go, with a standard Powerbank charger.

The price of single brick will be $119. And shipping will begin in November.

WEBSITE – www.buwizz.com

http://www.buwizz.com/

THE KICKSTARTER CAMPAIGN  –

https://www.kickstarter.com/projects/973645257/789115000?token=eafeb608

SubPos Ranger: Indoor Positioning System

Veröffentlicht am von
Antworten

The SubPos Ranger is as an open source indoor positioning system to be used for robotics applications in the education and hobbyist markets. It has primarily been designed as a flexible radio frequency platform for experimenting and tinkering, that allows you to not only obtain positioning and perform distance measurements, it can also be used for passive motion detection as well as communication between embedded devices.

While there are many positioning systems on the market, the Ranger has been created to be extremely cost effective, easy to use and develop for. While other systems are usually locked down in one way or another, whether that be functionality or availability of source code, the Ranger is completely open and flexible. Perfect for the budding hobbyist to invent the next big thing.

The Ranger is fully operational and ready for manufacture, and a complete system can be had for $274AUD (~$210USD), which gives you 3D positioning in a room, as well as a receiver to output the position. Once set up, the system can give up to +-10cm of accuracy. Other options are also available to experiment with too, such as a cheaper option for two nodes to perform distance measurements and motion detection, or a Wi-Fi support add-on.

Key Features:
•        Supports 2D and 3D Positioning – not just x and y, but z also.
•        2.4GHz ISM Spectrum – supported worldwide.
•        Standards Compliant Hardware – supports 802.15.4 and can also utilise Zigbee or 6LoWPAN communication protocols.
•        Reconfigurable RF Chipset – enables many different 2.4GHz ISM applications.
•        Firmware Updates over USB – no need for any extra programming hardware.
•        Open Source Hardware and Software – hack, repurpose and play to your heart’s content.
•        Modular Design – the Ranger allow all sorts of connectivity options. You can connect it to anything such as a Raspberry Pi via USB or GPIO, Arduino or to your smartphone via Wi-Fi.
•        Low Level Raw Data and Parameters – access to all low level measurement data and parameter tweaks are available to discover interesting new applications (such as motion detection).
•        Node Position Calibration – get the position of nodes automatically; no manual fixed node measurements required.
•        9-Axis Accelerometer – the client expansion board contains a 9 axis accelerometer for increased positioning accuracy.

Board Image – https://cdn.hackaday.io/images/7007401465041329447.jpg
Client Image – https://cdn.hackaday.io/images/3158211465041337828.jpg

Low Cost Walking Robot Makes It Easy To Get Into Robotics

Veröffentlicht am von
Antworten

The mePed is a robot kit that was designed from the ground up to be an affordable, easy to build robot for beginners and experts alike.

Spierce Technologies announced today that it is raising funds via a crowdfunding campaign on Kickstarter to finish development and drive down the cost of their flagship walking robot, the mePed. The company has set out to raise at least $5,000 to fund the first batch of mePed kits and give them enough orders to negotiate better pricing and make the kits more affordable for everyone.

The mePed is a four legged quadruped robot that comes in kit form which the user assembles using the included tools. Out of the box, it’s not much more than just a remote control toy but what make the mePed robot special is that it is completely open source and programmable. The source code used to make the mePed work is pre-programmed on the robots controller from the factory. This code can be modified by the user to make the robot do almost anything from navigating mazes, avoiding obstacles, dancing, waving, or even finding a fire and putting it out with the use of additional sensors.

Making low cost, high quality robot kits accessible to as many people as possible is the driving force behind the mePed Kickstarter campaign. When most walking robots cost upwards of $200 or more, with a successful Kickstarter campaign, Spierce Technologies can bring the mePed to market for less than $100.

The mePed kit includes everything needed to assemble a fully functioning, programmable robot. In addition to the robot body and servo motors, the kit include an Infrared Remote for giving the robot commands, an Ultrasonic Range Sensor for measuring the distance from objects in front of the robot, an Arduino compatible micro controller or the brains of the mePed, as well as the nuts, bolts, and wrenches needed to assemble the kit. The user only needs to supply 4 AA batteries.

https://www.kickstarter.com/projects/1881661007/meped-the-mini- quadruped-mobile-robot

Photon – a Child Friendly Code Teaching Robot About to Join Kickstarter

Veröffentlicht am von
Antworten

BIALYSTOK, Poland, 10.05.2016 – Photon Entertainment announced a crowdfunding campaign for Photon – world’s first interactive robot that grows up with children while teaching them programming.
The campaign is launching on May 31st and will take place over the course of six weeks. Price ranges from $149 for a super early bird version to $199 for a regular one. Stretch goals include backer exclusive accessories for the robot (such as a jetpack or mouth allowing for speech visualization) as well as donations for various child related charities (cancer wards, orphanages and others).

Photon is a robot meant to educate children through a mixture of storytelling, challenges and latest technology. It comes equipped with a variety of sensors that allow it to see, hear, feel the touch, distinguish between light and dark, measure proximity and more. Programming language used by the robot is inspired by Scratch and Google Blockly, which makes it simple and digestible by even the youngest users.


The robot comes with a paired application adjusted for both smartphones and tablets. Here, children learn the story of Photon – a little robot whose flying saucer crashed on earth. By completing coding related tasks they help him gain his senses back, and rebuild his spaceship. App encourages friendly competition and cooperation thanks to the inclusion of high scores, leaderboards and daily tasks. Experience points gained by progressing allow kids to customize their robot and decide the order in which he develops, making each unit unique.
“In four years there will be a gap of over a million computing jobs and candidates available for grabbing” says Marcin Joka, the CEO of Photon Entertainment. “We want to take part in closing that gap and proving that with a proper set of tools even a six year old can successfully learn how to code, and have a huge advantage in his or her future career”. The idea for creating Photon comes from minds of Marcin Joka, Krzysztof Dziemańczuk, Michał Bogucki and Maciej Kopczyński, four students and one academic lecturer form Bialystok University of Technology, Poland. The creators have received numerous distinctions and honorable mentions for their work. One of team members took part in creating an award winning Mars Rover Hyperion 2.